Contact us

1. Open the Plejd App and click the icon in the top left corner.
2. Click on the grey cog wheel in the top left corner to access your account settings.
3. Click the “Log out” button in the bottom.

1. Click “Log in” and then “Forgot password?”
2. Type in your e-mail address and click “Reset password”.

This is most likely due to an incorrect installation of the light switch. The spring in the light switch is probably placed on the wrong side. Please contact your electrician to fix it.

Yes, all our devices have the Astro Timer function. You can create a new Astro Timer in the app, under Scheduling.

1. Open the Plejd App and click on the blue cogwheel in the top right corner.
2. Choose “Load settings” then select the light source.
3. Select “Dim Start” to adjust the lowest dim level.
4. Press “+” until your light turns on, the settings will be saved automatically.

You don’t. The client activates their own Gateway.
When they log into the app and take control of the site using the owner code, they will be informed that there is a Gateway installed in their system. They will be able to activate it via the “Remote control” menu option.

The wireless button can not be used to increase your network reach since it is not part of the mesh network.

By connecting your system to Google Home, you can activate voice controls and use google assistant devices to control your lighting system.

In addition to your Plejd pucks and the Google Home app, you will need a Plejd Gateway to get started. You get the best experience if you also buy a google assistant compatible speaker so that you can use voice commands.

1. Select “+” on the top left corner, select “Set up device” and then select the option under “Works with Google”.
2. Find “Plejd” with the search function in the upper right corner.
3. Log in with your Plejd account and continue to follow the instructions on how to add your lights

Here are some of the commands you can use:

Ok Google, switch on all the lights.

Ok Google, switch off all the lights.

Hey Google, light up the living room.

Hey Google, turn on the window lamp.

Ok Google, switch off the kitchen light.

Ok Google, dim the kitchen light.

Ok Google, dim the living room light to 50%.

Hey Google, increase the brightness of the kitchen light to 75%.

Hey Google, activate Film Night. (Assuming you have a scenario with this name)

Ok Google, what lights are on in the children’s room?

The easiest way to install the app is to do it right on the watch.  Go to the watch’s Appstore and search for Plejd there. After installing it, you will need to log in to it with your Plejd account.

1. Scroll to the bottom and click on “account” and then “purchased”.
2. Then click on the cloud symbol for “Plejd Watch”.